Aquatic Technology Pool & Spa, "Creating Water as Art."™

Aquatic Technology Pool & Spa, "Creating Water as Art."™
Pools as an art form - the way it should be!

Saturday, March 8, 2014

Swimming Pool Lighting Low Voltage PROHIBITIONS




Section 680.23(C) could be changed for the 2014 NEC to permit a special isolation transformer with a ground shield, similar to the underwater luminaire transformer, for aboveground low-voltage lighting systems in proximity to the edge of a swimming pool. Until the change is submitted and processed, low-voltage lighting must not be located closer than 10 feet horizontally from the edge of the pool or 12 feet above the pool. - See more at: http://www.ecmag.com/section/codes-standards/waters-fine#sthash.cDzLMcen.dpuf
Section 680.23(C) could be changed for the 2014 NEC to permit a special isolation transformer with a ground shield, similar to the underwater luminaire transformer, for aboveground low-voltage lighting systems in proximity to the edge of a swimming pool. Until the change is submitted and processed, low-voltage lighting must not be located closer than 10 feet horizontally from the edge of the pool or 12 feet above the pool. - See more at: http://www.ecmag.com/section/codes-standards/waters-fine#sthash.cDzLMcen.dpuf
Low voltage landscape lighting cannot be installed within 10 feet horizontally or 12 vertically of a swimming pool, spa or hot tub.

Building Code Prohibition
 
The national Electric Code has been adopted in every US State.

Section 411.4(B) of the 2011 prohibits the installation of low voltage systems within 10 feet of any pool, spa or hot tub, unless specifically permitted by section 680 of the NEC. 

What can I do?

Section 680.22(C) outlines the requirements for low voltage lighting used around a swimming pool.  It does not describe any low voltage lighting fixtures or components that are not underwater illuminares.  

Section NEC 680.23(A)(2) specifically discusses underwater illuminares.

Because low voltage lighting around the pool are not specifically defined (as required by NEC 411), they are still prohibited.


How do you install landscape lighting close to a pool and still remain safe & code compliant?


Magic.  

This is what experienced designers spend their time and talents developing.

There are "work arounds" (no, they do not include special transformers, plastic fixtures, high voltage lighting, or distant projector style illuminares).

Give us a call.  We'll be happy to discuss your needs and to design a safe, compliant system for your project.

Paolo Benedetti - Aquatic Artist 
"Creating water as art."™ 
Aquatic Technology Pool and Spa ©www.aquatictechnology.com 
You may contact Paolo Benedetti at: info@aquatictechnology.com or at 408-776-8220

No comments:

Post a Comment

If you desire to publish your comment, DO NOT INCLUDE names, links or advertising references. They will not be published and your comment deleted. Comments are moderated, so do not waste your time.
If you want to ask a question of Paolo Benedetti, you may email him at: info@aquatictechnology.com